MR100 series www.vishay.com vishay mills revision: 17-aug-12 1 document number: 31814 for technical questions, contact: ww2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 wirewound resistor, ultra precision, epoxy molded, axial lead features ? resistance values up to 6 m ? ? resistance tolerances down to 0.01 % ? temperature coefficients down to 2 ppm/c ? material categorization: for definitions of co mpliance please see www.vishay.com/doc?99912 standard electrical specifications global model power rating p 25 c w resistance range ? resistance range ? maximum working voltage v 0.01 %, 0.02 %, 0.05 %, 0.1 % 0.25 %, 0.5 %, 1 % mr101 0.120 10 to 400k 1 to 400k 150 mr102 0.175 10 to 750k 1 to 750k 200 mr103 0.200 10 to 750k 1 to 750k 200 mr104 0.150 10 to 500k 1 to 500k 100 mr105 0.200 10 to 1.0m 1 to 1.0m 200 mr106 0.250 10 to 1.2m 1 to 1.2m 300 mr107 0.330 10 to 2.5m 1 to 2.5m 400 mr108 0.400 10 to 3.8m 1 to 3.8m 300 mr110 0.500 10 to 3.8m 1 to 3.8 m 400 mr111 0.500 10 to 3.8m 1 to 3.8m 400 mr112 0.750 10 to 6.0m 1 to 6.0m 600 mr114 1.000 10 to 6.0m 1 to 6.0m 800 mr115 1.500 10 to 6.0m 1 to 6.0m 900 mr116 2.000 10 to 6.0m 1 to 6.0m 1000 global part number information global part numbering example: mr106250r00tae66 (visit www.vishay.net sap parts manual for all options) global model (5 digits) value (6 digits) tolerance (1 digit) tc (1 digits) packaging code (3 digits) special (up to 2 digits) (see standard electrical specifications global model column for options) r = decimal k = thousand m = million 1r5000 = 1.5 ? 1k5000 = 1.5 k ? 1m0000 = 1 m ? t = 0.01 % q = 0.02 % a = 0.05 % b = 0.1 % c = 0.25 % d = 0.5 % f = 1.0 % a = standard, 10 to 30 (w) b = 3900 (q) c = 4500 (m) d = 6000 (n) g = 5 j = 2 e66 = lead (pb)-free bulk pack (dash number) from 1 to 99 as applicable s = 0.025 " terminal historical part numb er example: mr106w250r0t mr106 w = standard 250 ? 0.01 % historical model tc resistance value tolerance r106250 r00ta e m 6 6
MR100 series www.vishay.com vishay mills revision: 17-aug-12 2 document number: 31814 for technical questions, contact: ww2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in inches [millimeters] note (1) 0.025" [0.635] available, this is called out by putting an s in the special section of the part number. material specifications element: nickel-chrome alloy, ot her materials available depending on tc requirements core: molded epoxy encapsulant: epoxy standard terminals: 100 % matte tinned copper part marking: mills, model, value, tolerance, date code note ? due to resistor size limitations some resistors will have minimal information marked on parts derating global model dimensions in inches [millimeters] l 0.025 [0.635] d 0.005 [0.127] ld 0.002 [0.051] mr101 0.250 [6.35] 0.187 [4.75] 0.025 [0.635] mr102 0.375 [9.52] 0.187 [4.75] 0.025 [0.635] mr103 0.450 [11.43] 0.187 [4.75] 0.025 [0.635] mr104 0.250 [6.35] 0.250 [6.35] 0.025 [0.635] mr105 0.375 [9.52] 0.250 [6.35] 0.032 [0.813] (1) mr106 0.500 [12.70] 0.250 [6.35] 0.032 [0.813] (1) mr107 0.750 [19.05] 0.250 [6.35] 0.032 [0.813] (1) mr108 0.500 [12.70] 0.375 [9.52] 0.032 [0.813] mr110 0.750 [19.05] 0.375 [9.52] 0.032 [0.813] mr111 0.750 [19.05] 0.375 [9.52] 0.032 [0.813] mr112 1.000 [25.40] 0.375 [9.52] 0.032 [0.813] mr114 1.000 [25.40] 0.500 [12.70] 0.032 [0.813] mr115 1.500 [38.10] 0.500 [12.70] 0.032 [0.813] mr116 2.000 [50.80] 0.500 [12.70] 0.032 [0.813] l d ld rated power in % ambient temperature in c 100 80 60 40 20 0 20 40 60 80 100 120 140 160 0 120 140 160 180 1 %, 0.5 %, 0.1 % tolerance 0.05 %, 0.02 % tolerance 0.01 % tolerance technical specifications parameter unit MR100 resistor characteristics temperature coefficient ppm/c 10 > 100 ? ; 20 for 10 ? to 100 ? ; 30 for 1 ? to 9.99 ? terminal strength lb 4.5 dielectric withstanding voltage v ac 750 operating temperature range c - 55 to 145 maximum working voltage v ( p x r ) 1/2
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
